While you are driving, Tattle-Trail provides early warning for blown tires, tread separation, loose hitch or tow bar, bad wheel bearings, broken suspension, sway, loose load, and low battery notification.

While you are parked, Tattle-Trail monitors for motion caused by   impact, theft or intrusion from up to 1,000 ft. away. Qualifies for 5% discount on your insurance!

 Tattle-Trail is available in both portable and permanent mount configurations and doesn’t require any calibration or additional wireless repeaters. Can’t cause valve stem leaks!

Click on the image above to read the Highways July 2006 Article "Relying on Others"

Tattle-Trail is a wireless and portable towing monitor system designed to alert drivers to potential towing hazards. This "Made in the USA"  product uses "state of the art" technology to continuously measure vibration on vehicles towed behind a truck, RV or motor home. 

Any chassis vibration exceeding the user selected "normal" threshold will generate both audible and visual alarms. Once notified, the operator can take action to prevent further property damage (useful in alerting operator if a towed Jeep enters " Death Wobble").

Failures that may cause increased vibration are:

• Tire Tread Separation
  
  
  
• Flat Tires
  
  
  
• Loose Lug Nuts
  
  
  
• Broken Suspension Components
  
  
  
• Malfunction Of Hitch Assembly  
  
  
  
• Runaway Of The Towed Unit
  
  
  
• Death Wobble

Simple to Install, Easy to Use

Tattle-Trail is a total plug and play system. The only connection required for both the transmitter and the receiver is +12VDC power. The transmitter plugs into the 12VDC receptacle of the towed vehicle and the receiver plugs into the 12VDC receptacle of the pulling vehicle. The transmitter and receiver communicate the towed vehicle status using radio frequency (2.4Ghz) and require no additional wiring or calibration. Ever!  The Tattle-Trail towing monitor system can be used in many different trailering applications.

Additional Features

• Remotely monitors the towed vehicle for theft / intrusion when used in the "Park" mode.

• A voltage monitor feature alerts the user of a low battery condition in the towed vehicle.
  

Tow with Confidence

Over two years of development and testing went into the design of the Tattle-Trail Towing Monitor System. The end result is a proven product that is accurate, simple to use and provides additional peace of mind when towing.

Click on above button for User Application Tips